Q: What is digit shift technology?

A: Digit shift technology electronically uses a 4 digit display to show 8 different numerical values by displaying the highest unit values as they are reached. Timer and clock displays can be configured to use this technology.

For example: In  the count up timer mode the display would show hundredths and seconds and then shift right to show seconds and minutes then shift right to show minutes and hours.

Q: What size display do I need to purchase for viewing in my conference room?

A: A 2.3” high display is visible up to 100ft. indoors. The model of the elapse timer unit is DC-25UT. The wireless version is DC-25UTW.

Q: What size display do I need for a large auditorium or gymnasium?

A: A 4” high display is visible up to 200ft. indoors. The model of the elapse timer unit is DC-40UT. The wireless version is DC-40UTW.

Q: What size clock do I need for my church sanctuary?

A: A 4” high display is visible up to 200ft. indoors. The model of the clock unit is DC-40S. The wireless controller version is DC-40SW

Q: What size clock do I need for my manufacturing floor?

A: A 4” high display is visible up to 200ft. or a 8” high display is visible up to 400ft. Both the DC-40S and DC-80S can be purchased in double sided viewing with wireless remote control.

Q: How many clocks can I put together in a system?

A: You can put as little as 2 clocks together or several thousand clocks together to make a clock system.

Q: Can I mix different sizes and types of clocks together in a clock system?

A: You can mix different types of clocks together in a clock system without any problem. (i.e. digitals, analogs, 6 digit, wireless, wired, elapse timers, etc.)

Q: Can you replace my existing analog clocks with digitals or analogs?

A: We make direct replacements for existing analog clocks and digital clocks.

Q: Do you make a clock system that can be interfaced to my existing bell system or shift/break system.

A:: we make several different types of master clocks that can be used for running existing bell, clock systems. Model number BR-50, EZ-Time software and many others.

Q: Why are LED digital clocks more reliable than analog clocks?

A: LED digital clocks have no moving parts to wear out. However LED technology will reach its, "Half Life", expectancy after 100,000 hours of use, or about 11.4 years. This means the digits will begin to dim somewhat.. That's why we have field replaceable digits, (or LED cubes).

Q: What are master clocks?

A: Master clocks are the central time keeping unit which is wired to all the clocks in your facility. LED digital clocks are updated every minute, for a, "Hyper-accurate", time keeping system.

Q: What's and LED?

A: see What's an LED?